Page 7 - DAYLIGHT ITALIA 2020

5 DAYLIGHTITALIA

<1,5 s if P < 10W
Starting time <2,0 s
<1,0 if P ≥ 10W
< 60 s or < 120 s for lamps containing < 40 s or < 100 s for lamps contai-
Lamp warm-up time to 60% ø
mercury in amalgam form ning mercury in amalgam form
Premature failure rate ≤ 2,0 % at 200 h ≤ 2,0 % at 400 h
UVA + UVB radiation ≤ 2,0 mW/klm ≤ 2,0 mW/klm
UVC radiation ≤ 0,01 mW/klm ≤ 0,01 mW/klm
≥ 0,50 if P < 25 W ≥ 0,55 if P < 25 W
Lamp power factor
≥ 0,90 if P ≥ 25 W ≥ 0,90 if P ≥ 25 W
Colour rendering (Ra) ≥ 80 ≥ 80

TABLE 5 - FUNCTIONALITY REQUIREMENTS FOR LAMPS EXCLUDING COMPACT FLUORESCENT LAMPS AND LED LAMPS
Functionality parameter Stage 1 Stage 5

≥ 85 % at 75 % of rated average ≥ 85 % at 75 % of rated average
Lumen maintenance
lifetime lifetime
Rated lamp lifetime ≥ 1 000 h ≥ 2 000 h
≥ four times the rated lamp life ≥ four times the rated lamp life
Number of switching cycles
expressed in hours expressed in hours
Star t in g t ime < 0,2 s < 0 ,2 s
Lamp warm-up time to 60 % ø ≤ 1,0 s ≤ 1,0 s
Premature failure rate ≤ 5,0 % at 100 h ≤ 5,0 % at 200 h
UVA + UVB radiation ≤ 2,0 mW/klm ≤ 2,0 mW/klm
UVC radiation ≤ 0,01 mW/klm ≤ 0,01 mW/klm
Lamp power factor ≥ 0,95 ≥ 0,95

3. PRODUCT INFORMATION REQUIREMENTS ON LAMPS (e) Warm-up time up to 60 % of the full light output (may be indicated as instant full light if
For non-directional household lamps, the following information shall be provided less than 1 second);
as from Stage 2, except where otherwise stipulated. (f) A warning if the lamp cannot be dimmed or can be dimmed only on specific dimmers;
3.1. Information to be visibly displayed prior to purchase to end-users on the packaging and (g) If designed for optimal use in non-standard conditions (such as ambient temperature Ta
on free access websites. ≠25 °C), information on those conditions;
The information does not need to be specified using the exact wording of the list below. (h) Lamp dimensions in millimeters (length and diameter);
It may be displayed using graphs, figures or symbols rather than text. (i) If equivalence with an incandescent lamp is claimed on the packaging, the claimed
These information requirements do not apply to filament lamps not fulfilling the efficacy equivalent incandescent lamp power (rounded to 1 W) shall be that corresponding in
requirements of Stage 4. Table 6 to the luminous flux of the lamp contained in the packaging.
(a) When the nominal lamp power is displayed outside the energy label in accordance with The intermediate values of both the luminous flux and the claimed incandescent lamp
Directive 98/11/EC, the nominal luminous flux of the lamp shall also be separately power (rounded to 1W) shall be calculated by linear interpolation between the two
displayed in a font at least twice as large as the nominal lamp power display outside the adjacent values.
label;
(b) Nominal life time of the lamp in hours (not higher than the rated life time);
(c) Number of switching cycles before premature lamp failure;
(d) Colour temperature (also expressed as a value in Kelvins);
TABLE 6
Claimed equivalent
Functionality parameter
incandescent lamp power
CFL Halogen LED and other lamps (W)
125 119 136 15
229 217 249 25
432 410 470 40
741 702 806 60
970 920 1055 75
1398 1326 1521 100
2253 2137 2452 150
3172 3009 3452 200

(j) The term energy saving lamp or any similar product related promotional statement about (b) Rated wattage (0,1 W precision);
lamp efficacy may only be used if the lamp complies with the efficacy requirements (c) Rated luminous flux;
applicable to non-clear lamps in Stage 1 according to Tables 1, 2 and 3. If the lamp (d) Rated lamp life time;
contains mercury (e) Lamp power factor;
(k) Lamp mercury content as X,X mg; (f) Lumen maintenance factor at the end of the nominal life;
(l) Indication which website to consult in case of accidental lamp breakage to find (g) Starting time (as X,X seconds);
instructions on how to clean up the lamp debris. (h) Colour rendering. If the lamp contains mercury
3.2. Information to be made publicly available on free-access websites (i) Instructions on how to clean up the lamp debris in case of accidental lamp breakage;
As a minimum, the following information shall be expressed at least as values. (j) Recommendations on how to dispose of the lamp at its end of life.
(a) The information specified in point 3.1;